In a world of high-end home appliances, some home machines are designed to make you feel like you are living a luxurious lifestyle.

But if you don’t want to take the time to make it yourself, you can buy a DIY beauty machine and then just make it look good.

Here’s how to make your own beauty machine at Home Depot, Sears and Wal-Mart.1.

Make your own machine by removing the parts and cleaning it thoroughly.2.

Cut out the parts that need to be removed and wash them thoroughly.3.

Use a sharp knife to cut the parts apart and separate the parts.4.

Use your kitchen table to clean the machine.5.

Remove the plastic case from the machine and take out the circuit board.6.

Clean the circuit boards of any dirt and grease.7.

Clean and dry the circuit parts to remove any dust and grease from the circuit.8.

Remove and dry all of the wires from the power cord.9.

Clean out any electrical connections on the circuit and the wires.10.

Replace the circuit wires and replace the circuit components.11.

Clean up any remaining dust and debris from the inside of the machine by rinsing the inside with a mixture of bleach and water.12.

Wash the machine to remove dust and any remaining dirt.13.

If you need to replace a part that is no longer in use, just take a piece of electrical tape and wrap the part in duct tape.14.

Use the tape to cover the electrical connection to the machine’s circuit board and the parts inside.15.

Install the power supply and power to the circuit unit.16.

Use some of the bleach to wipe the circuit circuit board to remove dirt and debris.17.

Install and charge the power source.18.

Repeat for all of your circuit components including the power switch, ground, and USB port.19.

Install your other components including your speaker.20.

Replace your power supply, power cable, and power switch.21.

Remove any wiring from the electrical cord.22.

Install any additional electrical connections from the back of the box to the power and audio input jack.23.

Install a speaker if you need one.24.

Install some cables for a power cord, power cord plug, and the audio input.25.

Install other cables and connectors to attach the audio output to your speakers and power supply.26.

Install additional wiring for your speaker and audio output.27.

Install an additional power cord and plug if you want an additional supply.28.

Install another power cord to power the audio source if you have an additional source.29.

Install more cables to connect to the audio device or speaker.30.

Install extra wires for your speakers or audio device.31.

Install two extra audio connectors to connect a speaker to your power source or a headphone to your headphones output.32.

Install one additional audio connector to connect the audio outputs of the speaker or headphone.33.

Add an additional USB connection if you are using a USB hub or power source that doesn’t support audio.34.

Add additional USB and/or power cables to the headphone output if you would like an additional connection.35.

Add more cables for the headphone jack if you require more audio cable length.36.

Add some additional connectors to the headphones output if they do not require additional cable length or you need more audio power.37.

Add the audio cables and power cables together to make a more durable audio cable.38.

Add a second audio cable if you desire.39.

Install Ethernet connections in the front of the unit to connect it to your computer.40.

Install speakers or headphones if you prefer to use the headphones for more than a few hours at a time.41.

Add other components if you wish.42.

Install optional power adapters for audio devices.43.

Install power cables in the back for additional power or audio connections to your audio devices or power supplies.44.

Install all of this to make the unit sound great.